安徽省铜陵市铁山头铜矿床地质特征及找矿潜力

铁山头铜矿床处于铜陵矿集区的中东部，属于扬子陆块下扬子凹陷中的铜陵隆起。矿床位于凤凰山矿田北侧，成矿潜力较大。综合研究分析认为：①接触交代作用使得岩体接触带及附近变质形成矽卡岩矿化带；②区内凤凰山岩体（花岗闪长岩）系成矿母岩；③矿体主要赋存于花岗闪长岩与三叠系下统南陵湖组石灰岩接触带上；④矿床成因类型为高—中温热液交代矽卡岩型矿床。     

Oxygen vacancies as a link between the grain growth and grain boundary conductivity anomalies in titanium-rich strontium titanate

Titanium-rich (Sr/Ti?=?0.995) strontium titanate (ST) ceramics, air-sintered in a temperature range of 1400–1625?°C, were reported to possess anomalies in the grain growth and analogous anomalies in the grain boundary (GB) conductivity activation energy. However, these two interface-related phenomena, occurring at GBs, could not be associated with each other using a simple “brick-layer” model. In this work we revise the topic and advocate that the deviation from the model comes from the oxygen vacancies localized at GBs of the rapidly-cooled ST ceramics. To verify this, we annealed the ceramics in oxygen and performed their systematic and comparative analysis using impedance spectroscopy. A levelling-off in the GB conductivity activation energy, which increases for ≤1.24?eV, and a four-fold decrease in the GB permittivity are observed after annealing. Thus, we confirm a key role of oxygen vacancies in relation between the grain growth and GB conductivity anomalies of as-sintered Ti-rich ST ceramics.     

Mullite-bonded SiC-whisker-reinforced SiC matrix composites: Preparation,characterization, and toughening mechanisms

A novel mullite-bonded SiC-whisker-reinforced SiC matrix composite (SiCw/SiC, SiC whisker-to-SiC powder mass ratio of 1:9) was designed and successfully prepared. Before preparing the composite, the inexpensive lab-made SiCw was first modified by an oxidation/leaching process and then coated with Al₂O₃. The kinetics results indicate that the oxidation process can be described by improved shrinking-cylinder models. The aspect ratio of SiCw improved after modification. Subsequently, raw materials with a SiC–SiO₂–Al₂O₃ triple-layered structure were obtained after the Al₂O₃-coating process and used as feedstocks during the subsequent hot-pressing sintering. Finally, the characterization of the composites indicates that the mullite-bonded sample performs better (relative density of 93.8?±?1.4%, flexural strength of 533.3?±?18.2?MPa, fracture toughness of 13.6?±?2.1?MPa?m^1/2, and Vickers hardness of 20.6?±?2.5?GPa) than the reference sample without the mullite interface. The improved toughness could essentially be attributed to the moderately strong interface bonding and effective load transfer effects of the mullite interface.     

严寒地区单体建筑太阳能-相变墙系统蓄热特性研究

利用太阳能对水加热并通入相变墙进行蓄热，对减少严寒地区单体建筑供热能耗有重要意义。以大庆市某单体建筑为例，结合该地区太阳能分布特点及建筑热负荷大小，对适用于该地区的太阳能-相变墙系统进行集热与储热能力计算，并采用CFD方法研究单一工况下该系统的热工变化规律及不同热水参数、换热管规格对相变墙蓄热特性的影响。结果表明：该相变墙热稳定性良好，但受自然对流影响，底部相变材料熔化较慢；管径DN25、入口流速0.3m/s、供水温度310.15K、回水温度309.15K、管间距107mm可使相变材料在4小时内完成蓄热，平均节能率为31.8%。研究结果可望为降低严寒地区建筑供热能耗提供新思路。     

二氧化碳加氢制甲醇铜基催化剂性能的研究进展

二氧化碳（CO₂）加氢制甲醇对于解决CO₂排放和能源紧缺问题具有重要意义，催化剂的研究是这项技术的关键。铜基催化剂因高效廉价而被广泛研究，但目前的生产效率离实现工业化仍有距离。本文针对铜基催化剂，首先探讨了活性中心的存在形式，然后从活性组分负载量、载体、助剂、制备方法及条件、预处理条件这5个方面，分别分析其对催化剂的活性、选择性以及稳定性等的影响，以期为CO₂高值转化为甲醇的铜基催化剂的制备和筛选提供参考。按照广泛接受的双位点机理可知，CO₂转化率与铜表面积密切相关，甲醇选择性与强碱位点含量密切相关。因此，各方面因素通过影响催化剂比表面积、铜表面积、铜分散度、碱性位点、铜与载体的协同作用等物理化学参数，进而影响CO₂转化率与甲醇选择性。     

Study of using a multi-touch tabletop technology to facilitate collaboration,interaction, and awareness in co-located environment

This study aimed to evaluate how differently co-located users perform and interact while solving problems by using existing and newly developed interaction mechanisms of a multi-touch tabletop system on a large-size tabletop display. Furthermore, this study aimed to investigate users’ perceived situation awareness due to the system. This study conducted one experiment and introduced three newly developed interaction mechanisms: two-way rubber band, drag-and-response, and centre collection area. Two-way rubber band enables users not only to send but also to request digital objects. Drag-and-response allows users to accept or to reject digital objects sent by others; therefore, it eliminates conflicting situations and interference. Centre collection area stores, organises, and manages shared digital resources on a surface of a tabletop display, so that users have an overall picture of available resources. This paper discusses results of an experiment, research findings, and implications along with conclusions and several suggestions for future development and research.     

测井曲线标准化方法研究

由于长岭凹陷区经过近60年的勘探开发,再加上井场井眼条件的差异、测井系列、仪器刻度、测量时间及操作者不同等因素,使得各测井曲线存在系统误差。因此在开展储层参数研究和有效厚度划分时,为消除这些非地层因素对原始资料的影响,有必要对测井曲线进行标准化,以保证解释结果的合理性与可靠性。测井曲线标准化方法可以分为定性和定量两种类型。其中定性方法主要包括直方图法标准化校正、均值法标准化校正和重叠图法标准化校正;定量方法则为趋势面分析校正法。本论文利用Matlab软件,采用趋势面方法对研究区域内的井进行测井曲线标准化。结果表明经过趋势面法标准化校正能够消除不利因素,准确的提取出测井曲线中的各种有用地质信息。     

A new insight into the adsorption mechanism of patulin by the heat-inactive lactic acid bacteria cells

The primary objective of this study was to identify the characteristics of the heat-inactived lactic acid bacteria (LAB) cells involved in the adsorption of patulin. The bacterial cells were characterized by Scanning Electron Microscopy coupled with Energy Dispersive X-Ray Spectroscopy (SEM-EDS), Transmission Electron Microscopy (TEM) and Brunauer–Emmett–Teller (BET) technique. The patulin-exposed bacterial cells and patulin-unexposed bacterial cells were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Zeta Potential and Contact Angle Method. It was found that Lactobacillus brevis 20023 (LB-20023), which has the highest specific surface area and cell wall volume, showed the highest capacity to adsorb patulin from the aqueous solution. Five major elements (C, N, O, P, and S) were detected by SEM-EDS, and LB-20023 displayed the highest nitrogen-to-carbon (N/C) ratio (0.2938). LB-20023 exhibited the highest hydrophobicity, but the zeta potential was not prominent compared to other bacterial cells. The main functional groups involved in adsorbing patulin were C–O, OH and/or NH groups, suggesting that polysaccharides and/or protein were important functional components. Above all, the adsorption capacity of bacterial cells had close relationships with physical and chemical properties of cell surface, including specific surface area, cell wall volume, nitrogen-to-carbon (N/C) ratio, hydrophobicity and functional groups. Further study will be needed to find other additional functional factors.     

How the ICT development level and usage influence student achievement in reading,mathematics, and science

The main purpose of this study is to investigate how national ICT development level and individual ICT usage will influence achievements in reading, mathematics, and science for 4th and 8th grade school students. Large-scale international databases, including TIMSS 2011, PIRLS 2011, and PISA 2012, were employed in the current study. Hierarchical linear models (HLM) were applied to examine both country- and individual-level variables. According to the findings of this study, the national ICT development level is a significant positive predictor for individual academic performance in all three subjects for both 4th grade and 8th grade students, while the national economic development level was controlled for. Such finding indicates a similar trend of the ICT influences for both groups, although there exists a difference in terms of the extent of the relationships. In addition, individual-level ICT use is a significant predictor, even if students' gender and socioeconomic status are controlled for; however, its influence is mixed across different student groups and subjects depending on the ICT usage type.     

四川矿区典型煤层地应力场瓦斯渗透性规律实验研究

在深部开采或复杂地质条件下,地应力对煤岩渗透率的影响明显,进而影响煤矿瓦斯抽采的效果。对四川矿区不同典型煤层条件下的原煤进行了实验研究,分析矿区典型地应力特征条件下煤岩渗透率的变化规律,拟合了煤岩渗透率与有效应力的函数关系模型。研究发现:煤岩的渗透率与有效应力呈规律性的反比例关系,并存在拐点。这一发现为该矿区根据地应力条件进行煤层强化增透措施选取提供了依据,该研究成果在四川矿区白皎煤矿的保护层开采应用中取得了较好的效果,瓦斯抽采效果良好。